Inflating Your Tires
Brand-new Levy Light and Plus scooters ship with air-filled tires and extra-thick inner tubes. Use a standard bike pump with a gauge to inflate both tires to 50–60 PSI before riding and check them regularly. If you have a demo or refurbished scooter, or changed its tire or tube setup, confirm the right target with Levy Support.
Our newer extra-thick inner tubes support the recommended 50–60 PSI operating pressure. We recommend this range to reduce the risk of pinch flats, where the inner tube gets pinched against the rim over a bump, and help maintain top speed and battery range.
For this extra-thick inner-tube setup, running at 35–40 PSI is also acceptable if you prefer a softer ride over bumps. The trade-off is a higher risk of pinch flats and potentially reduced top speed and battery range compared with 50–60 PSI.
When inflating the front tire, it's best to use a valve extender as the valve opening can sit shallow on the front wheel.
We recommend checking your tire pressure at least every other week when riding frequently. Riding on low PSI can cause your tires to more easily puncture or develop leaks.
Was this article helpful?
Related Articles
Adjusting the rear brake
Occasionally the rear brake will need to be adjusted, either when your scooter first arrives or over time as the brake pads start to wear.
Levy Max Wiring Diagram
OLD J41 J16 J15 J14 HIGO CONN J13 OMNI CONN J12 OMNI IOT ASI CONTROLLER Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal...
Brake Pad and Caliper Replacement
Estimated Time to Complete: 15 minutes Tools Required: 5mm wrench Parts Required: New brake pads: Purchase here Caliper: Purchase here (Optional if...


