Using The Valve Extenders
Valve extenders are useful for inflating your tires when a bike pump can't easily attach to the tire valve. With 10" tires, valve extenders may not be necessary, but are certainly helpful. However, valve extenders are usually needed for 8.5" tires as the valve sits deep within the rim.
The valve extender has threads that screw onto your valve. Once you have removed your valve cap, the extender will screw on by turning to the right. After that, just attach your bike pump tightly to the valve extender and you're ready to start pumping!
To order replacement valve extenders, you can purchase directly from our website, or alternatively on Amazon.
For visual instructions, please check out this video on using the valve extender:
Was this article helpful?
Related Articles
Brake Pad and Caliper Replacement
Estimated Time to Complete: 15 minutes Tools Required: 5mm wrench Parts Required: New brake pads: Purchase here Caliper: Purchase here (Optional if needing of replacements) Caliper Bolts: Purchase here Break Pad Replacement Your first step will be to remove the caliper from the disk. You …
Preventative Maintenance
After 180 days, your Levy scooter is likely due for some preventative maintenance. Here at Levy, we recommend regularly checking the components listed below. We are now offering a preventative maintenance service which will include the following maintenance actions for your scooters: NOTE: Levy …
Levy Max Wiring Diagram
OLD J41 J16 J15 J14 HIGO CONN J13 OMNI CONN J12 OMNI IOT ASI CONTROLLER Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal 21 Red B+ 4 Red B+ 4 Red B+ 1 Red B+ 1 Blue B+ 4 Blue B+ 17 Green RX 2 Green RX 2 Green TX 4 Green TX 4 B…