What PSI should I keep the tires inflated at?
What pressure should I use?
Brand-new Levy Light and Plus scooters ship with air-filled tires and extra-thick inner tubes. Check both tires with a gauge and inflate to 50–60 PSI before riding.
Our newer extra-thick inner tubes support the recommended 50–60 PSI operating pressure. We recommend this range to reduce the risk of pinch flats, where the inner tube gets pinched against the rim over a bump, and help maintain top speed and battery range.
For this extra-thick inner-tube setup, running at 35–40 PSI is also acceptable if you prefer a softer ride over bumps. The trade-off is a higher risk of pinch flats and potentially reduced top speed and battery range compared with 50–60 PSI.
If you have a demo, refurbished, older or modified scooter, or have changed its tires or tubes, contact Levy Support to confirm the right pressure for the fitted setup. Solid tires do not require inflation.
Do the tires come inflated?
Yes, but air-filled tires may need more air on arrival after storage or transit. Check both tires with a gauge before the first ride.
How do I inflate the tires?
Use a standard bike pump with a gauge. Remove the valve cap, attach the pump securely, check the reading and add air to the target for your fitted setup. Check both tires and replace the valve caps. A finger check is not a reliable pressure measurement.
Our Tire Pump has a built-in gauge: https://shop.levyelectric.com/products/tire-pump. A suitable bike pump you already have works too.
The front valve can sit shallow in the wheel. A valve extender may be necessary depending on your pump and wheel setup.
How often should I check the pressure?
Use a pump with a gauge to check both air-filled tires before riding. Check the pressure at least every other week when riding frequently. Do not ride on a flat tire.
Low pressure can be hard to notice and increases the risk of pinch flats and leaks. Continuing to ride on a flat can permanently damage the tire and require replacement.
What if a tire will not hold air?
Do not ride on a flat tire. If it will not hold air after inflation, contact Levy Support with photos of the tire and valve. An inner tube may need replacement; most bike shops can handle the installation. Inner-tube sealant can help prevent punctures.
Was this article helpful?
Related Articles
Adjusting the rear brake
Occasionally the rear brake will need to be adjusted, either when your scooter first arrives or over time as the brake pads start to wear.
Levy Max Wiring Diagram
OLD J41 J16 J15 J14 HIGO CONN J13 OMNI CONN J12 OMNI IOT ASI CONTROLLER Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal...
Brake Pad and Caliper Replacement
Estimated Time to Complete: 15 minutes Tools Required: 5mm wrench Parts Required: New brake pads: Purchase here Caliper: Purchase here (Optional if...