Replacing the Throttle / Brake Handle on the Levy Plus
Replacing the throttle, brake handle, or headlight on the Levy Plus involves removing the Top Unit of the scooter in order to access the internal LCD control panel.
The process is the same for each component that would need to be replaced on the top unit and is outlined in the video below.
If you wish to replace the entire top unit instead of individual components, that is also an option as we sell the completed assembly on our website.
Was this article helpful?
Related Articles
Replacing the Tire Valve Stem
If your valve stem becomes damaged on your Levy tubeless tires you can order replacements here - and if you choose to replace them yourself, check out the...
Brake Pad and Caliper Replacement
Estimated Time to Complete: 15 minutes Tools Required: 5mm wrench Parts Required: New brake pads: Purchase here Caliper: Purchase here (Optional if...
Adjusting the rear brake
Occasionally the rear brake will need to be adjusted, either when your scooter first arrives or over time as the brake pads start to wear.