How to Turn the Scooter and Taillights On/Off & Activate the Throttle
To turn the scooter On/Off, press and hold the Power Button on the throttle for 2 seconds.
To turn the taillights On/Off, double-press the Menu button on the throttle.
Please note, the blinking taillight will always be activated as a safety feature when braking, even if riding during the day.
To activate the throttle, remember to Kick-Push the scooter first and be moving at greater than 2 mph to engage the motor, then press your thumb down on the throttle. Why? Kick-pushing preserves the battery life of your scooter. You can disable the Kick-Push function (the default setting) and start from a standstill, but remember that you’ll use more battery power and reduce the range of your scooter if you do, since starting from a standstill requires extra power consumption. See here for information on changing this setting.
Was this article helpful?
Related Articles
Brake Pad and Caliper Replacement
Estimated Time to Complete: 15 minutes Tools Required: 5mm wrench Parts Required: New brake pads: Purchase here Caliper: Purchase here (Optional if needing of replacements) Caliper Bolts: Purchase here Break Pad Replacement Your first step will be to remove the caliper from the disk. You …
Levy Max Wiring Diagram
OLD J41 J16 J15 J14 HIGO CONN J13 OMNI CONN J12 OMNI IOT ASI CONTROLLER Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal Pin Color Signal 21 Red B+ 4 Red B+ 4 Red B+ 1 Red B+ 1 Blue B+ 4 Blue B+ 17 Green RX 2 Green RX 2 Green TX 4 Green TX 4 B…
My tire is punctured / flat
As replacing / repairing tires requires disassembly of the scooter and proper tools to change the tire, we recommend taking your scooter to a mechanic / bike shop that is experienced with tire replacements. For Tubeless Tires If you get a flat and your tires are tubeless, it's possible to seal …