Maintaining your Electric Scooter Brakes
Overtime, you may need to adjust your brake to either tighten or loosen friction against the disc in order to optimize braking power. You can do this by using the 5mm wrench included with your scooter and following the instructions here.
It's also important that you keep your rear brake caliper clean and free of debris. While the Levy is waterproof in rain, wet / salty roads can corrode the brake line and components if not cared for properly. We recommend a simple lubricant like WD-40 to periodically clean and lubricate the brake line and components that can become dirty:
Was this article helpful?
Related Articles
Replacing the Tire Valve Stem
If your valve stem becomes damaged on your Levy tubeless tires you can order replacements here - and if you choose to replace them yourself, check out the...
Brake Pad and Caliper Replacement
Estimated Time to Complete: 15 minutes Tools Required: 5mm wrench Parts Required: New brake pads: Purchase here Caliper: Purchase here (Optional if...
Adjusting the rear brake
Occasionally the rear brake will need to be adjusted, either when your scooter first arrives or over time as the brake pads start to wear.