Levy Electric
Help Center/Fleet Operations/Replacing the IoT on the Okai ES400 Scooter / Bike
Back to Help Center

Replacing the IoT on the Okai ES400 Scooter / Bike

August 16, 2024

 

 

Repair part: IOT

Tools list:

  • T20 bit (T20*75mm)
  • Hollow plum blossom bit
  • Electric screwdriver

Disassembly steps (Working Hours: 1 minute):

  1. Disassemble 2 screws fixing the IOT and remove the IOT. (T20 bit)

  2. Disconnect the IOT connector

Full parts image:

  1. Connect the IOT (green) connector

  2. Organize the wire and assemble the IOT.

  3. Tighten 2 screws fixing the IOT (T20 bit) (torque: 2.5N. m-3.5N. m)

Was this article helpful?

Related Articles

Unlocking the battery compartment lock of the vehicle (Okai / Segway)

If the battery needs to be swapped, what you're going to do is change its status to "charging." This will electronically unlock the battery compartment,...

Replacing SIM card on Okai Fleet Scooters / Bikes

ZK1xx Series Disassembly and Cleaning SIM Card Operation Instructions 1. Tools Required: Electric screwdriver (0-10kgf.cm) Electrostatic...

How does your rental fleet program work?

Levy Fleets is primarily a software and services package that we offer to 3rd party operators looking to launch their own scooter or bike rental fleet.