Levy Electric
Help Center/Fleet Operations/Geofencing and setting ridable boundaries
Back to Help Center

Geofencing and setting ridable boundaries

March 30, 2023

Geofencing can work in two ways, either as a no-go zone where vehicles will be stopped if they enter that territory, or as a low-speed zone where they will be slowed down to a very low riding speed upon crossing into that territory.

In both cases - the user will be notified that they are entering a special zone with both a push notification as well as an in-app message that shows the geofenced boundaries.  Once the scooter leaves the zone, normal riding functionality will be restored.  

The third type of zone is an incentive zone or "Bonus Zone" where users can be incentivized with free riding credits or bonuses if they return their vehicle to a specific location, for example - to facilitate charging or to return the vehicle to a location that is seeing high demand. 
 
Bonus zone - if the users end rides in the bonus zone, they will get a bonus to either their ride or their wallet. In case the user is charged after the ride, the bonus is received before the ride is charged. It means the user will be charged -X% of the trip. For example, a bonus is set to 10% of the ride price, cost per ride $4, user is charged $3.60 as $0.40 was deducted as a bonus. In case the user rides using a bonus, their ride costs will be deducted from the bonus in full and afterwards they will receive the bonus zone bonus amount in their wallets.
 

Was this article helpful?

Related Articles

Unlocking the battery compartment lock of the vehicle (Okai / Segway)

If the battery needs to be swapped, what you're going to do is change its status to "charging." This will electronically unlock the battery compartment, allowing you to remove the battery. When the scooter is in the charging state, it will also be taken off the map, so users won't be able to rent…

Replacing the IoT on the Okai ES400 Scooter / Bike

Repair part: IOT Tools list: T20 bit (T20*75mm) Hollow plum blossom bit Electric screwdriver Disassembly steps (Working Hours: 1 minute): Disassemble 2 screws fixing the IOT and remove the IOT. (T20 bit) Disconnect the IOT connector Full parts image: Connect the IOT (green) connector Or…

How does your rental fleet program work?

Levy Fleets is primarily a software and services package that we offer to 3rd party operators looking to launch their own scooter or bike rental fleet. It's primarily geared towards operators running fleets of less than 200 vehicles that don't have the resources to manage their own software, b…