Repair part: IOT
Tools list:
- T20 bit (T20*75mm)
- Hollow plum blossom bit
- Electric screwdriver
Disassembly steps (Working Hours: 1 minute):
-
Disassemble 2 screws fixing the IOT and remove the IOT. (T20 bit)
-
Disconnect the IOT connector
Full parts image:
-
Connect the IOT (green) connector
-
Organize the wire and assemble the IOT.
-
Tighten 2 screws fixing the IOT (T20 bit) (torque: 2.5N. m-3.5N. m)
Comments
Please sign in to leave a comment.